
Home DIY’s that have performed the challenging task of removing linoleum realize how difficult it can be. Depending on the number of years that the linoleum has been laid, will determine the severity of the job. After years the adhesive can literally become bonded to the floor. There are tricks to the trade, however, to make a tedious task much easier to perform.
When linoleum is laid on a concrete floor it is much easier to remove than when it is laid on a wooden floor. Should you be working with a wooden floor and not sure of the wood, you can determine what kind of subfloor you have, simply by taking a section in a corner and peeling it back. If the subfloor happens to be plywood, then you have the option of removing both the linoleum and the subfloor at the same time. However, if the subfloor is hardware, you will want to keep it in tact.
Removing Linoleum From a Wood Floor
First, determine what your sub floor is- plywood or hardwood. If the sub floor happens to be hardwood, you will want to determine which way the grain is running to cut the linoleum with the grain.
Cut the linoleum into strips of about eight inches and take a heat gun to soften the glue. Once the glue is soft, remove the linoleum. You can then scrape the remaining glue off and sand the surface of the hardware to remove all remaining glue.
Should you not be refinishing the hardwood floor then smooth the wooden sub floor to prepare it for your new flooring.
Removing Linoleum From a Concrete Floor:
The first step in removing linoleum from a concrete floor is to cut the flooring into strips of about eight inches wide. This can easily be done with a utility knife. Once you’ve cut the floor into strips pour hot water onto the flooring and allow it to sit for a few minutes. This will help the glue to soften a bit and help ease the removal of the linoleum. Once the linoleum is removed, continue to soften the glue with hot water and scrap it off.


